Til toppen
$params.loc no nb $request.session.getAttribute("lang")

Highlander med access Jack

Varenummer: IP-2
Lagerbeholdning:
NOK

inkl. mva.

<46> Combine the Highlander Pickup System with a second transducer, such as an internal, condenser microphone or a magnetic, sound hole pickup, and enhance your sound. (The mic or magnetic pickup is plugged into the Access Jack which provides power if required).

The Signal from the iP-2 Pickup System is connected to the tip of the stereo output jack, while the signal from the second sound source is connected to the ring. Having both signals available separately, you can use different sound systems for each pickup or combine both signals with a stereo preamplifier or mixer.

iP Pickup Specifications:

Frequency Response: 2Hz - >400KHz Nominal Output Level: -25dB
Nominal Impedance: High > 5 Megohms
Diameter: .07" (.18mm)
Length: 3.625" (10cm) for Acoustic Guitar
(Can be ordered in any length up to 10 feet / 305cm)

iP-2 Preamplifier Specifications:

Frequency Response: Flat from 10Hz to >500KHz
Dynamic Range: >100dB (ref. 10Hz to 40KHz)
Input Impedance: Matched to Pickup
Output Impedance: <80ohms
nominal output level: -10db
headroom: 18db (ref. -10db)
power consumption: 440uA
power: one 9v battery
battery life: > 1000 hours
(Measurements made with a test load of 100Kohms)
Länkar med mer information:

» Highlander's officiella hemsida
» Installation
<45> Combine the Highlander Pickup System with a second transducer, such as an internal, condenser microphone or a magnetic, sound hole pickup, and enhance your sound. (The mic or magnetic pickup is plugged into the Access Jack which provides power if required).

The Signal from the iP-2 Pickup System is connected to the tip of the stereo output jack, while the signal from the second sound source is connected to the ring. Having both signals available separately, you can use different sound systems for each pickup or combine both signals with a stereo preamplifier or mixer.

iP Pickup Specifications:

Frequency Response: 2Hz - >400KHz Nominal Output Level: -25dB
Nominal Impedance: High > 5 Megohms
Diameter: .07" (.18mm)
Length: 3.625" (10cm) for Acoustic Guitar
(Can be ordered in any length up to 10 feet / 305cm)

iP-2 Preamplifier Specifications:

Frequency Response: Flat from 10Hz to >500KHz
Dynamic Range: >100dB (ref. 10Hz to 40KHz)
Input Impedance: Matched to Pickup
Output Impedance: <80ohms
nominal output level: -10db
headroom: 18db (ref. -10db)
power consumption: 440uA
power: one 9v battery
battery life: > 1000 hours
(Measurements made with a test load of 100Kohms)
Links til mere information:

» Highlander's officielle hjemmeside
» Installation
Hovedbilde
Last ned